以下是smartio c104h系列多串口卡使用opt-4c/opt-4d连接电缆时针式db-25/db-9连接器的管脚分配图:

rs-232 cable wiring
以下是smartio ci-104j系列多串口卡使用的rj-45连接器的管脚分配图:

根据连接电缆和所连接设备,主要有以下几种连接类型:
类型1:连接smartio c104h系列多串口卡到dte设备。

1.this rj45 to female db25 rs-232 cable(cn20030)is available from moxa.
2.4/7 means either line 4 or line 7 can be used for gnd.

4/7 means either line 4 or line 7 can be used for gnd.
类型2:连接smartio c104h系列多串口卡到dce设备。

this r j45 to male db25 rs-232 cable (cn20040) is available from moxa
4/7 means either line 4 or line 7 can be used for gnd.
类型3:用三线方式连接smartioc104h系列多串口-k到dte设备。
如果[hardware flow contro1]被设置为“on”,用户必须短接相应串口的rts和cts,dsr、dtr和dcd。
如果[hardware flow contr01]被设置为“opp”,用户可以使rts、cts、dsr、dtr和dcd信号线悬浮或空着。

1.4/7 means either line 4 or line 7 can be used for gnd.

2.4/7 means either line 4 or line 7 can be used for gnd.