placement of the router
set the router on a desktop or other flat, secure surface. do not place excessive weight on top of the router that could damage the router.
rack-mounting the router
the router comes with two brackets and eight screws for mounting on a 19-inch rack. the attached brackets are shown in figure d-1.
line up the bracket holes with the holes located on the router’s sides. attach the mounting brackets using the included screws, four on each side of the router.
when the brackets are attached to the router, you can rack-mount it. attach the router to the rack, using two screws on each side of the router, as shown below in figure d-2.
wall-mounting the router
the router is shown in figure d-3 with two holes on the bottom. the horizontal distance between the two holes is 3.701 inches (94 mm). install two screws or nails into the wall, 3.701 inches (94 mm) apart. after the screws or nails are secured on the wall, line up the router’s holes with the screws or nails, and mount the router on the wall. the wall-mount holes are shown below, in figure d-3. the suggested mounting hardware is shown in figure d-4.
