the broadcom netxtreme gigabit ethernet boot agent is part of the bios code in your computer. you can use it to configure the network as a startable device, and you can customize where the network startup option appears in your startup sequence. you enable and disable the broadcom netxtreme gigabit ethernet boot agent from the configuration/setup utility program.

    complete the following steps to enable the broadcom netxtreme gigabit ethernet boot agent:

    1. from the configuration/setup utility main menu, select devices and i/o ports and press enter.

    2. select system board ethernet pxe/dhcp and use the right arrow (→) key to set it to enabled.

    3. select save settings and press enter.