use the serveraid manager program to:

    1 configure arrays

    2 view your raid configuration and associated devices

    3 monitor operation of your raid controllers

    to perform some tasks, you can run serveraid manager as an installed program. however, to configure the scsi controller and perform an initial raid configuration on your computer, you must run serveraid manager in a startable-cd mode, as described in the instructions in this section. if you install a raid adapter in your computer, use the configuration method described in the instructions that come with the adapter to view or change scsi settings for attached devices.

    see the serveraid documentation on the ibm serveraid support cd or additional information about raid technology and instructions for using serveraid manager to configure your scsi controller. additional information about serveraid manager is also available from the help menu. for information about a specific object in the serveraid manager tree, select the object and click actions → hints and tips.