when working with some devices, such as hard disk drives, adapters, and memory modules, you must first remove the support bracket to access the device.

    complete the following steps to remove the support bracket:

    1. read safety information beginning on page vii and the guidelines in “handling static-sensitive devices” on page 33.

    2. remove the side cover (“removing the side cover” on page 37).

    3. pull out on the rear end of the support bracket approximately 150 mm (6 in.).

    4. disengage the front end of the support bracket from the computer and set the bracket aside.

   

    to reinstall the support bracket, reverse the previous steps.