1) optional interface modules can be hot-swapped into a running projector. 2) any audio connectors shown are non-functional in this projector.
dual sd/hd-sdi input module
standard with roadster s+. see section 2.
the dual sd/hd-sdi module enables incoming sd or hd serial digital data to be tiled across multiple screen displays, overlapped for extra-bright displays, or distributed to additional projectors for multiple, same-image screens.
dual sd/hd-sdi features
1 accepts and decodes up to two serial digital inputs
2 smpte 292 and 259m compatible
3 outputs up to two 10-bit ycbcr 4:2:2 video signals
4 provides input(s) to output(s) loop-through capability
5 supplies interchangeable inputs as part of the picture-in picture display
rgb500 input module 38-804606-xx
the rgb500 input module receives analog rgb input signals from computers or other rgb source devices.
rgb500 features
1 accepts 3, 4, or 5 wire rgb video (sync-on-green, composite sync, or
2 separate horizontal and vertical sync), up to 500 mhz bandwidth accepts ypbpr, composite (on green) and y/c (on red/blue)
3 bnc connectors for rgb signal inputs
rgb400ba input module 38-804610-xx
connect three-, four-, or five-wire rgb video signals of up to 400 mhz bandwidth—these are signals typically produced by high-resolution computer or workstations. the buffering capability of the module enables the incoming signal to be sent to a remote destination. inputs are 75s terminated.
rgb400ba features
1 accepts 3, 4, or 5 wire rgb video (sync-on-green, composite sync, or separate horizontal and vertical sync)
2 accepts ypbpr, composite (on green) and y/c (on red/blue)
3 bnc connectors for rgb signal inputs
4 buffered signals to a remote destination
rgb400 active loop-thru input module 38-804607-xx
the rgb400 alt input module receives analog rgb input signals from computers or other rgb source devices. video inputs are 75s terminated. video outputs provide buffered loop-through to another display device.
rgb400 alt features
1 accepts 3, 4, or 5 wire rgb video (sync-on-green, composite sync, or separate horizontal and vertical sync)
2 accepts ypbpr, composite (on green) and y/c (on red/blue)
3 bnc connectors for rgb signal inputs
4 buffered loop-through video outputs
composite -video input module 38-804608-xx
the composite video input module receives either composite video input signals from tape or disk players. video inputs are 75s terminated. video outputs are provided for buffered loop-through to another display device.
1) the s-video portion of this module is non-functional with this projector. connect composite video signals only. 2) this module is not a decoder.
composite video features
1 bnc connectors for composite rgb signals
2 4-pin mini-din connectors for s-video signals (note: non-functional)
3 buffered loop-through video outputs
pc250 analog input module 38-804609-xx
the pc250 analog input module receives analog rgb input signals from ibm pc compatibles or macintosh computers. video inputs are 75s terminated. video outputs are provided for buffered loop-through to another display device.
pc250 analog features
1 accepts vga or mac rgb video
2 15 pin d connectors for video
3 active loop-through video outputs
this interface does not accept vga and mac signals simultaneously.
dvi input module 38-804635-xx
the dvi input module can be installed to display digital video input signals conforming to the dvi (digital visual interface) single-channel standard.
features
1 supports digital visual interface (dvi) single-channel
2 supports vesa. extended display identification data (edid. )
3 provides an active-loop-through using a dvi connector (conforming to the dvi specification)
serial digital input module 38-804602-xx
the serial digital input module (sdi) accepts a serial digital 4:2:2 component video signal (ycbcr) via a single serial in bnc connector. the signal can loop through the serial out bnc out to another device (such as another projector). inputs are 75s terminated.
sdi features
1 accepts serial digital 4:2:2 component video (ycbcr)
2 provides both a serial in and a serial out bnc connector
3 includes status leds for signal and error
4 smpte 259m compatible
index
