1 vlan configure

    this page can set vlan mode as port-based vlan, 802.1q vlan or just disable the vlan function.

    you have to restart the switch for valid value every time you change the vlan mode.

   

    if set 802.1q vlan, you can set pvid, ingress filtering 1 and ingress filtering 2 in this page too.

   

    (1) pvid (port vid : 1～255): type the pvid.

    (2) nonmember pkt: it matches that ingress filtering rule 1 on web management. it will forward only packets with vid matching this port’s configured vid. press space key to choose forward or drop the frame that vid not matching this port’s configured vid.

    (3) untagged pkt: it matches that ingress filtering rule 2 on web management. it will drop untagged frames. press space key to choose drop or forward the untagged frames.

    2 create a vlan group

    (1) create port-based vlan and add member/nonmember ports to it

    a).select [edit].

    b).vlan name: type a name for the new vlan.

    c).grp id: type the vlan group id. the group id range is 1～26.

    d).member: press space key to choose vlan member.there are two types to select:

    a. member: the port is a member port.

    b. no: the port is not a member port.

    e).press ctrl+a go back action menu line.

    f).select [save] to save all configure value.

    if the trunk group exists, you can see it (ex: trk1, trk2…) after port26, and you can configure it is the member of the vlan or not.

   

    (2) create 802.1q vlan and add tagged /untagged member ports to it

    a).select [edit].

    b).vlan name: type a name for the new vlan.

    c).vlan id: type a vid (between 2～4094). the default is 1. there are 256 vlan groups to configure.

    d).protocol vlan: press space key to choose protocol types.

    e).member: press space key to choose vlan members. there are three types to select:

    untagged: this port is the member port of this vlan group and outgoing frames are no vlan-tagged frames.

    tagged: this port is the member port of this vlan group and outgoing frames are vlan-tagged frames.

    no: the port is not member of this vlan group.

    f).press ctrl+a go back action menu line.

    g).select [save] to save all configure value.

    if the trunk group exists, you can see it (ex: trk1, trk2…) after port26, and you can configure it as the member of the vlan or not.

   

    3 edit / delete a vlan group

    in this page, you can edit or delete a vlan group.

    a).press [edit] or [delete] item.

    b).choose the vlan group that you want to edit or delete and then press enter.

    c).you can modify the protocol vlan item and the member port as tagged or un-tagged and remove some member ports from this vlan group.

    d).after edit vlan, press [save] key to save all configures value.

    1). press [enter] once will complete deletion on delete mode.

    2). the vlan name and vlan id cannot be modified.

    3). the default vlan can’t be deleted.

   

   

    4 groups sorted mode

    in this page, you can select vlan groups sorted mode as

    (1) sorted by name

    (2) sorted by vid.in the edit/delete a vlan group page will display the result.

   

    in the edit/delete a vlan group page, the result of sorted by name.

   

    in the edit/delete a vlan group page, the result of sorted by vid.