1 system options
(1) press [edit].
(2) system name: type a name to be used for the switch.
(3) system contact: type the name of contact person or organization.
(4) system location: type the location of the switch.
(5) press ctrl+a go back action menu line.
(6) press [save] to save configure value.
2 community strings
use this page to add/edit/delete snmp community strings.
(1) community name: the name of current strings.
(2) write access: enable the rights is read only or read write.
1)restricted: read only, enables requests accompanied by this string to display mib-object information.
2)unrestricted: read write, enables requests accompanied by this string to display mib-object information and to set mib objects.
3 trap managers
a trap manager is a management station that receives traps, the system alerts generated by the switch. if no trap manager is defined, no traps are issued. create a trap manager by entering the ip address of the station and a community string.
(1) add the trap manager
1) press [add] -] [edit] to add the trap manager.
2) ip: type the ip address.
3) community name: type the community name.
4) press ctrl+a go to actions line, then press [save] key to save all configure.
(2) edit trap manager
1) press [edit] key to choose the item that you want to modify.
2) press [edit] key.
3) ip: type the new ip address.
4) community name: type the community name.
5) press ctrl+a go to actions line, press [save] key to save all configure.
(3)delete trap manager
1) press [delete] key.
2) choose the trap manager that you want to delete and then press enter.
3) press [enter] once will complete deletion on delete mode.
