1 working port setting
this page can set the actually work ports in trunk group.
(1) select [edit].
(2) group: display the trunk group id.
(3) lacp: display the trunk group’s lacp status.
(4) lacp work port num: the max number of ports can be aggregated at the same time. if lacp static trunking group, the exceed ports is standby and able to aggregate if work ports fail.
before set this page, you have to set trunk group on the page of trunk configuration first.
2 state activity
(1) select [edit].
(2) press space key to choose the item.
active: the port automatically sends lacp protocol packets.
passive: the port does not automatically send lacp protocol packets, and responds only if it receives lacp protocol packets from the opposite device.
(3) press ctrl+a go back action menu line.
(4) select [save] to save configure value.
if user set lacp mode in the trunk group, all of the member ports of this trunk group will set "active" automatic.
3 lacp status
when you set trunking groups you can see relation information here.
[quit]: exit this page and return to previous menu.
[previous page]: return to previous page to view.
[next page]: go to next page to view.