如果倾斜30°以上使用，可能会损坏投影机并引起事故。

    *usb接口符合usb 1.1标准。

    usb端子不能保证与所有usb兼容设备很好工作。

    safety

    usa

    ul60950 3rd edition

    canada

    csa c22.2 no.60950

    european community

    the low voltage directive

    (73/23/eec)

    iec60950 3rd edition

    emc

    usa

    fcc part 15b class b (doc)

    canada

    ices-003 class b

    european community

    the emc directive

    (89/336/eec)

    en55022 class b

    en55024

    iec/en61000-3-2

    iec/en61000-3-3

    australia/new zealand

    as/nzs cispr 22:2002 class b

    declaration of conformity

    according to 47cfr, part 2 and 15

    class b personal computers and peripherals; and/or

    cpu boards and power supplies used with class b

    personal computers

    we:epson america, inc.

    located at :3840 kilroy airport way ms: 3-13

    long beach, ca 90806

    tel:562-290-5254

    declare under sole responsibility that the product identified herein, complies with 47cfr part 2 and 15 of the fcc rules as a class b digital device. each product marketed, is identical to the representative unit tested and found to be compliant with the standards. records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47cfr 2.909. operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

    trade name :epson

    type of product :projector

    model :emp-82/62/x3

    fcc compliance statement

    for united states users

    this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. these limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. however, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

    1 reorient or relocate the receiving antenna.

    2 increase the separation between the equipment and receiver.

    3 connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.

    4 consult the dealer or an experienced radio/tv technician for help.

    the connection of a non-shielded equipment interface cable to this equipment will invalidate the fcc certification or declaration of this device and may cause interference levels which exceed the limits established by the fcc for this equipment. it is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. if this equipment has more than one interface connector, do not leave cables connected to unused interfaces. changes or modifications not expressly approved by the manufacturer could void the user' authority to operate the equipment.