management module leds
the management module has active and status leds showing the module’s operational status, plus leds on the rj-45 port showing network connections. the led states are described in the following table.
table 1-1. management module (j8731a) leds
10/100 base-t data terminal equipment (dte) port. use the rj-45 port to manage a procurve 8100fl switch from a management workstation through an inband telnet session. the rj-45 port is configured as a media data interface (mdi). for out-of-band console access, you can also connect directly to the rj-45 serial port on top of the chassis
pcmcia flash card. the pcmcia card slot holds a pc flash memory card (reserved for future software releases).
switch fabric module leds
switch fabric modules have two leds: an active led (on top) and a status led (on bottom). the led states are described in the following table.
table 1-2. switch fabric module (j8729a/j8730a) led
interface module leds
interface modules have leds showing activity and link status by port, plus a status led at the bottom showing the operational status of each module. led function and behavior differs according to module (refer to the following tables for details).
table 1-3. 1-port 10gb lr module (j8733a) leds
this module’s end-of-life is summer 2006. the 1-port x2 10gbe module shown on, provides functionally-equivalent lr connectivity (with separate purchase of lr transceivers) in an x2, mediaflexible package.
table 1-4. 10-port 100/1000base-t module (j8734a) leds
the 10-port 100/1000 base-t module shows the link status of each port on top and has an led showing the activity status of each port on the bottom.
table 1-5. 10-port mini-gbic module (j8735a) leds
the 10-port mini-gbic module shows the activity status of each port on top and has an led showing the link status of each port on the bottom.
the 10-port mini-gbic module supports various procurve mini-gbics. refer to the procurve switch fl modules installation guide for further details.
table 1-6. 1-port x2 10gbe module (j8736a) leds
the 1-port x2 10gbe module provides a flexible media transceiver slot that supports a number of different transceivers. refer to the procurve switch fl modules installation guide for further details.