the source and destination slots cannot be the same. for example, if the source file is on the card in slot 0, you cannot copy the file to the same card in slot 0.
follow these steps to copy a file between two slots:
step 1 enter privileged exec mode as follows:
router] enable
password: [password]
step 2 insert the flash memory card that contains the source file into the slot labeled 0.
step 3 insert a second flash memory card into the slot labeled 1. this card does not have to be partitioned.
step 4 enter the copy {slot0: | slot1:}[partition:filename]{slot0: | slot1:} [partition:filename] command to copy a file from one slot to the other. in the following example, there are no partitions on the destination flash memory card:
if you omit the partition and filename variables, you are prompted for them.
step 5 press return or enter y to erase the current contents of the destination partition (if any), or enter n to save the contents. then confirm your selection:
