1 turn the camera off
turn the camera off before connecting or disconnecting the video cable.
2 connect the video cable to the camera
insert the pin jack into the camera's video out connector.
3 connect the video cable to the video device
connect the other end of the cable to the videoin jack on the television or vcr.
4 tune the television to the video channel
5 turn the camera on
the television will show the image normally displayed in the monitor. the camera monitor will be blank.
use an ac adapter
to prevent the display in the television from turning off whenever the camera enters sleep mode, connect the camera to an eh-53 ac adapter (available separately).
choosing a video mode (
76)the video mode item offers a choice of ntsc and pal standards for video output. be sure that the standard selected matches that of any video device to which you connect the camera.