现需要将使用端口gigabitethernet0/1至gigabitethernet0/11的用户与使用端口gigabitethernet0/14至gigabitethernet0/24的用户实现分组，同时两个user-group都可使用端口gigabitethernet0/12和gigabitethernet0/13来实现连接服务器和外部网络。
2. 组网图
图6-2 user-group配置示例图
g0/1～g0/24为gigabitethernet0/1～gigabitethernet0/24的缩写，分别指代交换机的千兆以太网端口1～24。
3. 配置步骤
# 当系统为缺省状态时进入vlan 1视图。[h3c] system-view
enter system view, return to user view with ctrl+z.
[h3c]vlan 1
# 添加端口gigabitethernet0/12至gigabitethernet0/24到user-group 2中。
[h3c-vlan1]port gigabitethernet0/12 to gigabitethernet0/24 user-group 2
the vlan state has been changed to port-based vlan!
# 将端口gigabitethernet0/14至gigabitethernet0/24从user-group 1中删除。
[h3c-vlan1]undo port gigabitethernet0/14 to gigabitethernet0/24 user-group 1
# 查看当前的配置信息以确认配置。
[h3c-vlan1] display vlan 1
vlan state: port-based vlan
vlan id: 1
route interface: configured
ip address: 192.168.0.233
subnet mask: 255.255.0.0
tagged ports: none
untagged ports:
gigabitethernet0/1 gigabitethernet0/2 gigabitethernet0/3
gigabitethernet0/4 gigabitethernet0/5 gigabitethernet0/6
gigabitethernet0/7 gigabitethernet0/8 gigabitethernet0/9
gigabitethernet0/10 gigabitethernet0/11 gigabitethernet0/12
gigabitethernet0/13 gigabitethernet0/14 gigabitethernet0/15
gigabitethernet0/16 gigabitethernet0/17 gigabitethernet0/18
gigabitethernet0/19 gigabitethernet0/20 gigabitethernet0/21
gigabitethernet0/22 gigabitethernet0/23 gigabitethernet0/24
user-group:
user-group-1:
gigabitethernet0/1 gigabitethernet0/2 gigabitethernet0/3
gigabitethernet0/4 gigabitethernet0/5 gigabitethernet0/6
gigabitethernet0/7 gigabitethernet0/8 gigabitethernet0/9
gigabitethernet0/10 gigabitethernet0/11 gigabitethernet0/12
gigabitethernet0/13
user-group-2:
gigabitethernet0/12 gigabitethernet0/13 gigabitethernet0/14
gigabitethernet0/15 gigabitethernet0/16 gigabitethernet0/17
gigabitethernet0/18 gigabitethernet0/19 gigabitethernet0/20
gigabitethernet0/21 gigabitethernet0/22 gigabitethernet0/23
gigabitethernet0/24