the av800c series document scanner must have the following minimum requirements to run at rated speed as recommended:

    ·mac ii series; quadra series, perfoma series; power macintosh series, powerbook series or later;

    ·at least 20m bytes of free hard disk space;

    ·a minimum of 16m bytes of system memory required, 32m bytes or higher recommended;

    ·mac compatible display card and monitor with at least 256 colors; thousands colors or million colors display card recommended;

    ·system 7 or later.

    ·a floppy disk drive

    the installation procedures of avision scanner driver are as follows:

    1. close all the applications including the anti-virus program.

    2. install on your computer the image-editing or scanner-related application you want to use with the scanner, such as omnipage, photoshop, etc.

    3. insert "avision driver kit" disk into your floppy disk drive.

    the avision driver kit x.x.x dialog box as fig. 3-1 will appear. read "read me first" for some valuable information which you should note.

    4. double click on the "av kit x.x.x installer" icon. av kit x.x.x installer dialog box will appear as fig. 3-2.

    5. click easy install icon and drag it to the system icon in the right side. a "select a folder for plug-in" dialog box as fig. 33 will appear. select your application folder and select the "choose plug-ins" button. the installation will then be completed.

    6. choose restart to proceed your next step.

    7. if you want to use other optical character recognition (ocr)applications such as omnipage, xerox textbridge, type reader, etc., you have to setup the isis driver to access the scanner. the isis driver is a file named "avision scan." to setup, select "chooser" command from the "apple" menu. a dialog box as figure 3-4 will appear on the screen. select the "avision scan" icon, ignore the "scanner model" list and the "set scsi id" button, the list of scanner model will be displayed. click on the "set scsi id" button. the "scanner id" window as fig. 3-5 will appear. choose "detect". the current scanner id number will be verified and highlighted. press ok button. you can then start your application to use the scanner, or refer to your application manual for more details.

   

    figure 3-1 avision driver kit x.xx

   

    figure 3-2 av kit x.x.x installer

   

    figure 3-3 select a folder for plug-in

   

    figure 3-4 chooser

   

    figure 3-5 scanner id

    you can find the latest driver in our homepage located at the world wide web(www) with the web site: http://www.avision.com