北桥设置
内存设置
bank interleaving [disabled]
本项目允许您开启或关闭bank memory interleaving。设置值有:[disabled] [auto]
channel interleaving [auto]
本项目允许您开启或关闭channel memory interleaving。设置值有:[disabled] [auto] [reserved] [reserved] [reserved]
enable clock to all dimms [disabled]
本项目允许您开启或关闭未使用时钟至未安装内存条的dimms even memory 插槽。设置值有: [disabled] [enabled]
memclk tristate c3/atlvid [disabled]
本项目允许您开启或关闭c3 中的memclk tri-stating during 和alt vid。设置值有: [disabled] [enabled]
memory hole remapping [enabled]
本项目允许您开启或关闭memory remapping around memory hole。
设置值有: [disabled] [enabled]
unganged mode support [enabled]
本项目允许您开启或关闭force unganged 模式。设置值有: [disabled] [enabled]
power down enable [enabled]
本项目允许您开启或关闭ddr 电源向下模式。设置值有: [disabled] [enabled]
power down mode [channel]
本项目允许您开启或关闭ddr 电源向下模式。设置值有: [channel] [chip select]
dram timing 设置
memory clock mode [auto]
本项目允许您选择内存时钟模式。设置值有: [auto] [limit] [manual]
dram timing mode [auto]
本项目允许您选择dram timing 模式。设置值有: [auto] [dct 0]
memory voltage [auto]
本项目允许您设置内存电压。设置值有: [1.890v] [1.940v] [1.990v] [2.040v] [2.090v] [2.140v] [2.190v] [2.240v]
alternate vid [auto]
在低电源状态下允许您指定alternate vid。设置值有: [1.000v] [0.975v] [0.950v] [0.925v] [0.900v] [0.875v] [0.850v] [0.825v] [0.800v] [auto]
内部显卡
internal graphics mode [uma]
本项目允许您设置内部显卡模式。设置值有: [uma]
uma frame buffer size [auto]
本项目允许您选择uma frame buffer 大小。设置值有: [auto] [32mb] [64mb] [128mb] [256mb]
primary video controller [pcie/igfx/pci]
本项目允许您设置初始视频。设置值有: [pcie/igfx/pci] [pci/pcie/igfrx] [igfx/pcie/pci]