this projector can automatically tune to the display signals from most personal computers currently distributed. however, some computers employ special signal formats which are different from the standard ones and may not be tuned by multiscan system of this projector. if this happens, projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.

    this projector has a manual pc adjustment to enable you to precisely adjust several parameters to match with those special signal formats. this projector has 5 independent memory areas to memorize those parameters manually adjusted. this enables you to recall the setting for a specific computer whenever you use it.

    this pc adjust menu cannot be operated when the input signal is from rgb input (digital) terminal or "rgb" is selected on pc system menu (p22).

    1 press menu button and on-screen menu will appear. press point left/right button to move a red frame pointer to pc adjust menu icon.

    2 press point down button to move a red frame pointer to the item that you want to adjust and then press set button. adjustment dialog box will appear. press point left/right button to adjust value.

    fine sync

    adjusts an image as necessary to eliminate flicker from the display. press point left/right button to adjust value.(from 0 to 31.)

    total dots

    the number of total dots in one horizontal period. press point left/right button(s) and adjust number to match your pc image.

    horizontal

    adjusts horizontal picture position. press point left/right button(s) to adjust the position.

    vertical

    adjusts vertical picture position. press point left/right button(s) to adjust the position.

    current mode

    press set button to show the information of computer selected.

    clamp

    adjusts clamp level. when the image has a dark bar(s), try this adjustment.

   

    display area

    selects area displayed with this projector. select the resolution at display area dialog box.

    display area h

    adjustment of horizontal area displayed with this projector. press point left/right button(s) to decrease/increase value and then press set button.

    display area v

    adjustment of vertical area displayed with this projector. press point left/right button(s) to decrease/increase value and then press set button.

    full screen

    press point left/right button(s) to switch full screen function to "on" or "off." set "on" to resize the image with 4 x 3 aspect ratio to fit the screen.

   

    fine sync, total dots, display area (h/v) and full screen cannot be adjusted when "1035i (hdtv)" or "1080i (hdtv)" is selected on pc system menu (p22).

    3 store

    to store adjustment parameters, move a red frame pointer to store icon and then press set button. move a red arrow pointer to any of mode 1 to 5 that you want to store to and then press set button.

    mode free

    to clear adjustment parameters previously set, move a red frame pointer to mode free icon and then set button. move a red arrow pointer to the mode that you want to clear and then press set button.

    other icons operates as follows.

    reset

    reset all adjust parameters on adjustment dialog box to previous figure.

    quit

    close this dialog box.