the cruiser 150 supports connection over one isdn line, through a basic rate interface (bri) or two b-channels. if your card is a cruiser 384, you can connect up to three isdn lines (3-bri or six b-channels).

    ·to connect the videoconferencing card to an isdn line

    cruiser 150 connect an isdn cable to the isdn connector on the videoconferencing card's panel.

    cruiser 384 cruiser 384 supports the connection of up to three isdn lines. if you are going to receive incoming bonding calls, the order of connection, as detailed below is important.

    □ 1 bri = 128 kbps connectivity. to use only one isdn line, connect an isdn cable to the isdn 1 connector.

    □ 2 bri = 256 kbps connectivity. to use two isdn lines, connect the first isdn cable to the isdn 1 connector and the second isdn cable to the isdn 2 connector.

    □ 3 bri = 384 kbps connectivity. to use three isdn lines, connect the first isdn cable to the isdn 1 connector, the second isdn cable to the isdn 2 connector, and the third isdn cable to the isdn 3 connector.

    verify that the nt1 isdn adapter, installed by your phone company or isdn carrier, is connected and configured properly.