1. in the windows desktop, click the vcon meetingpoint icon.
the login dialog box appears.
2. enter mxm login information as follows (consult with your system administrator):
mxm login the name of your computer as listed in the mxm database and the mxm
name
password/ password required to log in. the first time you register, you must type it twice for verification. if you do not supply this
verify password password, the login request is rejected.
gatekeeper the ip address of the mxm. if you do not know it, ask your system administrator.
3. click connect to complete the login process.
-if the mxm automatically registers your computer, the meetingpoint application opens.
-if a message appears stating that the meetingpoint startup cannot proceed until login is granted, contact your system administrator.
if you are running meetingpoint for the first time after installation (or logging into a different mxm), the configuration wizard setup program appears. this program asks you to enter the information required to run meetingpoint from your specific location. for the complete standard setup procedure, see "setting up the meetingpoint configuration" on page 3-15.
meetingpoint's default properties are suitable for most video meeting requirements. if you must change these settings, please consult with your system administrator or vcon distributor.
at this point, if the system's communication lines are connected, you may start a video meeting and receive incoming video meeting calls.
