the ptz camera can be controlled from the video window in the meetingpoint application (see "controlling ptz camera(s)" of the meetingpoint 4.6 user guide).
make sure that the camera is turned off.
·to connect a ptz camera to the system card's panel
escort, cruiser 150 1. connect the yellow-tipped cable between the camera video out connector and the cam 2 connector of the system card panel.
2. connect the camera control cable between the camera visca in connector and a free com port on the computer.
3. verify that the camera is connected to a power supply.
cruiser 384 1. connect the s-video cable between the camera video out connector and the s-video connector of the system card panel.
2. connect the camera control cable between the camera visca in connector and a free com port on the computer.
3. verify that the camera is connected to a power supply.
for specific instructions on installing and operating the ptz camera, see its accompanying user's guide.
