if you want to record a video meeting, you must convert the video from svga to tv signals (ntsc or pal). the cruiser 384 supports the use of a pc-to-tv converter, such as focus's tview micro xga.

    ·to connect a pc-to-tv converter to the cruiser 384 panel.

    make sure that the converter is turned off.

    1. disconnect the svga monitor cable from the computer's svga port and connect it to the pc-to-tv converter's vga output connector.

    2. connect a 15-pin d-type cable between the pc-to-tv converter's vga input connector and the computer's svga port.

    3. connect the supplied audio cable between the vcr's audio in connector and the cruiser 384 card's vcr aud out connector.

    4. connect one end of the pc-to-tv converter's composite video cable between the converter's comp video connector and the vcr's video in (or aux-in, av-in, or s-video in) connector.

    -or-

    connect the male end of the pc-to-tv converter's s-video cable between the converter's scart/s-video connector and the vcr's video in (or aux-in, av-in, or s-video in) connector (europe only).

    for specific instructions on installing and operating the pc-to-tv converter, see its accompanying user's guide.