you can partially control the display of the system.s dialog boxes and active key guides. you may show the quick reference guides when you need them and to hide the guides when you are more familiar with mediaconnect 6000. in addition, if the softkey menu or any messages are hidden by the edges of the tv screen, you may move the mediaconnect screen so that it.s completely visible again.
· to display/hide the guide screen and the active keys guide
1. press [menu]. the main menu opens. select general.
2. in the general dialog box, select or deselect show guide screen.
· if selected, the guide screen appears when all dialog boxes are closed.
· if deselected, the guide screen is hidden.
3. select or deselect show active keys.
— if selected, the active keys guide appears to the left of every dialog box.
— if deselected, the active keys guide is hidden.
4. press [ok] to apply the change and close the dialog box.
· to move the mediaconnect screen
1. press [menu]. the main menu opens. select set video.
2. in the set video screen, press the red move gui softkey. 
3. a direction guide appears on the monitor. press the remote control.s arrow buttons to move the screen in the corresponding direction.
4. press [ok]. the direction guide closes.
5. press [ok] again to apply this position to the mediaconnect screen and close the dialog box.
changing viewing mode during a videoconference
different display modes are available during a videoconference.
■ local - your party
■ remote - the other party
■ pip - picture-in-picture. a small inset of the local party appears over the full screen video of the remote party. at the start of a call, pip mode is activated by default.
· to switch between local and remote view
press [display] on the remote control.· to turn the pip view off
press [pip] on the remote control.press it again to view in pip mode again.
· to move the pip to a different location
1. press [menu]. the main menu opens.
2. press the green move pip softkey. 
3. the move pip direction guide appears. press the arrow buttons until you are satisfied with the pip position.
4. press [ok]. the direction guide closes.
5. press [ok] again to close the main menu screen. the pip will appear in this position for all sessions, until you change it again.