the method of connecting the video output of your camera or deck to the stormbay depends on what connectors your camera or deck has. follow the appropriate step below.
step 1a: connecting via s-video
connect a s-video cable from the s-video input jack on the stormbay to the s-video output jack of your camera or deck.
s-video is the preferred connection method for analog video.
step 1b: connecting via composite
connect a composite video cable from the video input jack on the stormbay to the video output on your camera or deck.
step 1c: connecting via a/v jack
connect the video output of the a/v cable for your camera or deck from the video input jack on stormbay to the a/v jack on your camera or deck.
1、only use the composite adapter cable that was included with dvstorm!
2、using a different adapter cable may cause damage to dvstorm or your equipment.
make sure you use the correct a/v cable for your camera or deck. an audio y-cable will not work.
step 2: connect audio
the method of connecting the audio output of your camera or deck to the stormbay depends on what connectors your camera or deck has. follow the appropriate step below.
step 2a: connecting via rca
connect a stereo rca patch cable (or a pair of rca cables) from the audio input jacks on the stormbay to the rca audio jacks on your camera or deck.
remember, red is right, white is left. make sure the connectors match on both ends or your audio channels may be swapped.
step 2b: connecting via a/v jack
connect the audio outputs of the a/v cable for your camera or deck to the audio input jacks on the storm bay. next, connect the a/v cable to the a/v jack on your camera or deck.
1、make sure you use the correct a/v cable for your camera or deck. an audio y-cable will not work.
2、remember, red is right, white is left. make sure the connectors match or your audio channels may be swapped.
step 2c: connect via headphone output jack
since headphone output levels are generally not the same as line-level output, this method of connection is not recommended.
connect a stereo audio y-cable from your camera or deck's headphone out jack to the audio input jacks on the stormbay.
remember, red is right, white is left. make sure the connectors match on both ends or your audio channels may be swapped.
