the method of connecting the video output of your camera or deck to dvstorm depends on what connectors your camera or deck has. follow the appropriate step below.
step 1a: connecting via s-video
connect a s-video cable from the s-video input jack on the stormbay to the s-video output jack of your camera or deck.
s-video is the preferred connection method for analog video.
step 1b: connecting via composite
connect one of the composite video adapter cables from the dvstorm package to the video in jack on dvstorm.
next, connect a composite video cable from the composite video adapter cable to the video output jack on your camera or deck.
1、only use the composite adapter cable that was included with dvstorm!
2、using a different adapter cable may cause damage to dvstorm or your equipment.
step 1c: connecting via a/v jack
connect one of the composite video adapter cables from the dvstorm package to the video in jack on dvstorm.
next, connect the video output of the a/v cable for your camera or deck to the composite video adapter cable.
finally, connect the a/v cable to the a/v jack on your camera or deck.
1、only use the composite adapter cable that was included with dvstorm!
2、using a different adapter cable may cause damage to dvstorm or your equipment.
make sure you use the correct a/v cable for your camera or deck. an audio y-cable will not work.
step 2: connect audio
the method of connecting the audio output of your camera or deck to dvstorm depends on what connectors your camera or deck has. follow the appropriate step below.
step 2a: connecting via rca
connect one of the stereo audio cables from the dvstorm package to the audio in jack on dvstorm.
next, connect a stereo rca patch cable (or a pair of rca cables) from the stereo audio cable to the audio output jacks on your camera or deck.
remember, red is right, white is left. make sure the connectors match on both ends or your audio channels may be swapped.
step 2b: connecting via a/v jack
connect one of the stereo audio cables from the dvstorm package to the audio in jack on dvstorm.
next, connect the audio outputs of the a/v cable for your camera or deck to the stereo audio cable.
finally, connect the a/v cable to the a/v jack on your camera or deck.
1、make sure you use the correct a/v cable for your camera or deck. an audio y-cable will not work.
2、remember, red is right, white is left. make sure the connectors match or your audio channels may be swapped.
step 2c: connect via headphone output jack
headphone output levels are not the same as line-level output! this connection method is not recommended.
connect a stereo mini-jack patch cable from your camera or deck's headphone out jack to the audio in jack on dvstorm.
