the method of connecting the stormbay to the video input of your camera or deck depends on what connectors your camera or deck has. follow the appropriate step below.
step 1a: connecting via s-video
connect a s-video cable from the s-video output jack on the stormbay to the s-video input jack of your camera or deck.
s-video is the preferred connection method for analog video.
step 1b: connecting via composite
connect a composite video cable from the video input jack on the stormbay to the video output on your camera or deck.
step 1c: connecting via a/v jack
connect the video input of the a/v cable for your camera or deck from the video output jack on stormbay.
connect the other end of the a/v cable to the a/v jack on your camera or deck.
make sure you use the correct a/v cable for your camera or deck. an audio y-cable will not work.
step 2: connect audio
the method of connecting the stormbay to the audio input of your camera or deck depends on what connectors your camera or deck has. follow the appropriate step below.
step 2a: connecting via rca
connect a stereo rca patch cable (or a pair of rca cables) from the audio output jacks on the stormbay to the rca audio input jacks on your camera or deck.
remember, red is right, white is left. make sure the connectors match on both ends or your audio channels may be swapped.
step 2b: connecting via a/v jack
connect the audio inputs of the a/v cable for your camera or deck to the audio output jacks on the storm bay. next, connect the a/v cable to the a/v jack on your camera or deck.
m1、ake sure you use the correct a/v cable for your camera or deck. an audio y-cable will not work.
2、remember, red is right, white is left. make sure the connectors match or your audio channels may be swapped.
