the method of connecting the dvstorm to a video monitor depends on what connectors your video monitor has. follow the appropriate step below.
step 1a: connecting via s-video
connect a s-video cable from the s-video output jack on the stormbay to the s-video input jack of your video monitor.
s-video is the preferred connection method for analog preview to a video monitor.
step 1b: connecting via composite
connect one of the composite video adapter cables from the dvstorm package to the video out jack on dvstorm.
next, connect a composite video cable from the composite video adapter cable to the video input jack on your video monitor.
1、only use the composite adapter cable that was included with dvstorm!
2、using a different adapter cable may cause damage to dvstorm or your equipment.
step 2: connect audio
connect one of the stereo audio cables from the dvstorm package to the audio out jack on dvstorm.
next, connect a stereo rca patch cable (or a pair of rca cables) from the stereo audio cable to the audio input jacks on your video monitor.
remember, red is right, white is left. make sure the connectors match on both ends or your audio channels may be swapped.
