■ place the scanner on a horizontal, flat surface.

    ■ to ensure proper ventilation, allow a minimum of 10 cm (4 inches) free space around each side of the scanner and a minimum of 15 cm (6 inches) at the rear of the scanner.

    ■ make sure that no vibrations or shocks occur.

    ■ make sure that the area is free of excessive dust.

    ■ avoid any contact with water.

    ■ the scanner is designed to operate optimally when the environmental temperature is between 10°c and 35°c (50 °f to 95 °f). avoid exposure to direct sunlight and heating devices.

    ■ the scanner is designed to operate optimally when the environmental humidity is between 10% and 85%. avoid environments where humidity fluctuations might occur.

    ■ check whether the voltage of the power supply corresponds to the voltage of your scanner. if not, contact your dealer or agfa service representative.