if your computer cables and connector panel have color-coded connectors,match the color of the cable end with the color of the connector. for example, match a blue cable end with a blue connector, a red cable end with a red connector, and so on.
1.connect the monitor cable and tighten the screws.
on the fire gl4 video adapter,the first or only monitor must be connected to the bottom connector (connector number 1).
2.connect the keyboard and mouse cables.
if your computer has windows nt and a scrollpoint mouse,the scrollpoint function might not be enabled when you start the computer the first time.shut down and restart the computer to enable the scrolipoint function.
3.connect any additional devices you might have.
1 connect a printer or parallel device to the parallel connector.
2 connect a serial device or external modem to the serial connector.
3 connect universal serial bus (usb) devices to either of the two usb connectors.
4 connect optional devices, such as speakers, microphones, or headphones.
to operate the computer within fcc class a or class b limits,use a category 5 ethernet cable.
5 connect the ethernet cable to the r j45 ethernet connector.
4.if there is a label covering the power connector, remove it. connect the power cord to the power connector on the rear of the computer.
5.connect all other power cords into properly grounded electrical outlets.
when the computer power cord is first plugged in,the computer might turn on for a few seconds, and then turn off. this is normal.