do the following to start the scsiselect utility program:

    1.turn on the computer.

    2.whenthe[[[ press [ctrl][a] for scsiselect utility! ]]] prompt appears,press ctrl+a.

    3.whentheprompt, would you like to configure the host adapter or run the scsi disk uti 1 i ti es?, is displayed, make your selection, and then press enter.

    4.use the arrow keys to make a selection from the menu.

    1 press esc to exit the scsiselect utility program.

    2 press the f5 key to switch between color and monochrome modes (if your monitor permits).

    5.follow the instructions on the screen to change the settings of the selected items;then press enter.