because of the placement of the adapter support brackets, you might find it easier to lay the computer on it side with the cover lock facing you.
if you removed the support bracket, reinstall it before you replace the cover.see "removing the support bracket" on page 33 for details.
do the following to replace the computer cover:
1.clear any cables that might impede the replacement of the cover.
2.install the side cover by placing it into position on the computer. be certain the notches on the underside of the cover match up to the holes along the sides of the computer. press down on the cover release latch button as you close the cover release latch to lock the cover.
3.if you have not done so already, make sure that the two front stabilizing feet are rotated outward so that they properly support the computer. rotate each individual foot outward 90 degrees.
4.reconnect the external cables and power cords to the computer; then connect the power cords to electrical outlets.
5.turn on the attached devices;then turn on the computer.