dynamic microphone, which is usually fitted with a 1/4" stereo plug, such as those used in vocal performances.
condenser microphone, which is usually fitted with a 3.5 mm stereo plug, such as the microphone bundled with creative audio products.
by default, your audigy drive is set for use with a condenser microphone. to use a dynamic microphone, you must place the shunt (jumper cap) onto jumper jp1 on your audigy drive. see figure 2-3 on page 2-3 for the location of jumper jp1 on your audigy drive.
1.the jumper jp1 may not be available on certain models of audigy drive.
2.the shunt for jumper jp1 can be found together with the packet of screws provided.
