connect to a tv, a pc monitor, a projector to display the image. (see page 15.)
turn the power of the output device and the digital presenter on.
place the object on the lightbox, and adjust the head to face the object.
if there is no image on the tv,pc monitor or the projector ,check if the cable is properly connected and press the int/ext button of the presenter to select the input mode to int out.
select a proper lighting source with the lamp button of the presenter. each time you press the button, upper lamps on, lightbox on, then all lightings off.
remove or attach the adaptor lens according to the objects.
rotate the lens to remove or attach it.
remove the adaptor lens in the camera mode. (possible focal lenght: 1m ~ ∞)
attach the adaptor lens to view a material or a document or a film placed on the document plate. (possible focal length: 230mm ~ 360mm)
beyond the possible focal length mentioned above, it might be out of focus. so pay attention to the distance between the object to be viewed and the main unit and whether the adaptor lens is attached.
focus on the object.
auto focus control: press af
manual focus control: press [focus f] or [focus n] to adjust.
you see the image on the tv, the pc monitor or the projector.
to use versatile image control features, see pages 23 through 27.
1 to change the object projected during presentation, freeze the image on th screen by using freeze button of the presenter then change it .
2 to cancel the freezing,press freeze button again or exit button on the remote controller .
