to use gui drawing system, first of all, gui menu system and [freeze] or [recall] function must be activated.
then draw menu is now being activated. (see page 28)
when [draw] menu is clicked, gui draw toolbar is appeared on the screen and gui main menu disappeared.
1 using gui drawing system,gui menu system and [freeze] or [recall] function must be activated first.
2 if you want to exit from the gui drawing mode,click the [exit] menu button,or press exit button,or press exit button,or press exit button in remote controller,or press freeze button on the panel key / freeze button in remote controller when drawing mode was activated from freeze function.
exit button
use the exit button (
) to exit gui drawing system to normal mode, or clear all the user’s images on the full screen.tool selection
use the line width selection to set the line width to between 1 and 4 pixels.
drawing the single line
to draw a single line, click the single line icon and then,
1) position the cursor on the screen where you want the line to start.
2) press and hold the left/right mouse button.
3) drag the cursor.
4) to end the line, release the mouse button. sdp-950 creates the line.
drawing the rectangular
to create a rectangular, click the rectangular icon and then,
1) place the cursor at a corner of the area you want to select.
2) click and drag the mouse until the selection is the size you want.
3) release the mouse button.
drawing the freehand line
to create a freehand line, click the freehand line icon and then,
1) position the cursor on the image where you want the line to begin.
2) press and hold the left/right mouse button.
3) drag the cursor on the path you want the line to take.
4) release the mouse button.
eraser tool
1) click the eraser tool icon and then the cursor changes to the erasing rectangular.
2) move the cursor over the line and click to delete the line.
foreground / background color panel
there are two active colors in gui drawing system, the foreground (left mouse click) and background(right mouse click) colors.
you can change the brush colors by selecting new foreground and background solid colors using the color palette.
foreground / background color palette
use the color palette to select the colors that you want to draw the line.
move the cursor over the available colors panel. left-click to select a foreground color, right-click to select a background color. the two boxes above the color panel display the respective colors.
there are six colors to be selected, red, yellow, green, cyan, blue and magenta.
line width selection
use the line width selection to set the line width to between 1 and 4 pixels.
