1 review the precautions and pre-installation instructions. before installing the nic, ensure the system power is off, the system is unplugged from the power outlet, and that proper electrical grounding procedures have been followed. refer to the following figure to complete the remaining steps.

    2 remove the system cover, and select any empty pci slot. if you do not know how to identify a pci slot, refer to your system documentation.

    for optimal performance, select a pci-x slot. for second best performance, select a 64-bit pci slot.

    3 remove the blank cover plate from the slot that you selected (see item 1 in the figure, below).

    4 holding the pci card by the edges, align the nic's connector edge with the pci connector dock.

    1、the connector dock in a 32-bit pci slot is shorter than in a 64-bit pci slot.

    2、although the nic is designed to fit in either slot type, when installed in a 32-bit pci slot, part of the nic's connector edge will remain undocked. this is perfectly normal.

    5 applying even pressure at both corners of the card, push the nic until it is firmly seated in the pci slot. when properly seated, the nic's port connectors will be aligned with the slot opening, and its faceplate will be flush against the system chassis.

    do not use excessive force when seating the card, as this may damage the system or the nic. if the card resists seating, remove it from the system, realign it, and try again.

    6 secure the nic with the screw (see item 2 in the figure, below).

    7 replace the system cover and disconnect any personal anti-static devices.

    8 turn the system power on.

    after the system returns to normal operation, the nic hardware is fully installed. the next step is to connect the network cables.