these features are only available for windows nt server and enterprise server operating systems.

    if you have problems installing the advanced server features, uninstall the microsoft loopback adapter before installing the advanced server features. if needed, you can reinstall the microsoft loopback adapter afterwards. for more information see "installing the microsoft loopback adapter driver" on page 46.

    1 start your windows nt system and log in. you must have network administrator privileges to install the driver software.

    2 insert the enclosed 3com installation cd into the cd-rom drive.

    3 from the welcome screen, click exit. you must exit the master navigator to install advanced server features.

    4 click the start menu, and then select settings, control panel.

    5 the control panel window appears. double-click the network icon.

    6 in the network window, click the protocols tab.

    7 click add.

    8 the select network protocol window appears. click have disk.

    9 the insert disk window appears. type e:\windowsnt\bcmserv\ where "e" is the cd-rom drive. click ok.

    10 the select oem option window appears. click ok.

    this will install the advanced server features software and display a window.

    from this menu, you can create a team (see "creating a team and assigning nics" on page 42), or click ok to complete installation.

    11 in the network window, click close.

    12 when prompted to restart your computer, click yes. after the system restarts, advanced server features should be installed.