if you plan to update your network drivers and you are using an advanced server feature team, use the following procedures.

    failure to use the following procedure might result in loss of network connectivity before and after a system reboot.

    1 right-click network neighborhood and choose properties.

    2 select the protocols tab.

    3 open the tcp/ip protocol properties.

    4 write down the ip address information for the virtual nic, and then click cancel.

    5 click the adapters tab.

    6 highlight the network adapter, and then click update.

    7 type the path to the updated driver, and then click continue.

    example: e: 8 open the advanced server features driver properties.

    9 click save.

    10 type a filename to save the team information to be used during a restore, and then click ok.

    11 select a team, and then click delete team. click ok to remove the team.

    12 click close, and then click yes to restart the computer.

    13 after the machine restarts, right-click network neighborhood and choose properties.

    14 select the protocols tab.

    15 open the advanced server features driver properties.

    16 click restore.

    17 type the filename you used during the save, and then click ok.

    18 click ok again to make the changes.

    19 click close to reset the ip address on the virtual nic.

    20 when the machine prompts you to restart, click yes.