to remove the drivers from the autoexec.ncf file, locate the load and bind command lines associated with the broadcom driver and remark them out by inserting the # symbol at the beginning of each command line.

    example:

    # load b57 slot=2 frame=ethernet_802.2 name=b57_1_e82

    # bind ipx b57_1_e82 net=fafd3d25

    # load b57 slot=2 frame=ethernet_802.3 name=b57_1_e83

    # bind ipx b57_1_e83 net=5a2d8d6d

    # load b57 slot=2 frame=ethernet_snap name=b57_1_esp

    # bind ipx b57_1_esp net=477a35bd

    # load b57 slot=2 frame=ethernet_ii name=b57_1_eii

    # bind ipx b57_1_eii net=c3c8f2e4

    # bind ip b57_1_eii addr=172.16.1.1 mask=ff.ff.ff.0