1 to connect your s-video source (for capturing material), use an s-video cable, as well as two cables with rca connectors for audio. on the input side (in) of your breakout cable:

    a connect the video output from your s-video device to the s-video jack.

    b connect the left audio output channel of your device to the white audio-l jack.

    c connect the right audio output channel of your device to the red audio-r jack.

    if your video device has only one audio connector, use the left audio connector on the cable.

   

    2 to connect your s-video recorder, use another s-video cable and two more cables with rca connectors for audio. on the output side (out) of your breakout cable:

    a connect the s-video jack to the video input on your video recorder.

    b connect the white audio-l jack to the left audio input of your video recorder.

    c connect the red audio-r jack to the right audio input of your video recorder.

   

    3 to display the output from matrox rt.x10 on your ntsc or pal video monitor↑1, you can connect your video monitor to the breakout cable or your recorder. for an illustration of typical s-video connections that you can use, see "s-video connections using same device for capture and print-to-tape" on page 22.

    1 you can use a tv in place of an ntsc or pal video monitor. if your tv has a tv/video input switch, set it to video.