a connect the video output from your composite device to the yellow video jack.
b connect the left audio output channel of your device to the white audio-l jack.
c connect the right audio output channel of your device to the red audio-r jack.
2 to connect your composite video recorder, use another composite (rca) audio/video cable or three more separate cables with rca connectors. on the output side (out) of your breakout cable:
a connect the yellow video jack to the video input on your video recorder.
b connect the white audio-l jack to the left audio input of your video recorder.
c connect the red audio-r jack to the right audio input of your video recorder.
3 to display the output from matrox rt.x100 on your ntsc or pal video monitor↑1, you can connect your video monitor to the breakout cable or your recorder. for an illustration of typical composite connections that you can use, see "composite connections using separate source and record devices" on page 23.
1 you can use a tv in place of an ntsc or pal video monitor. if your tv has a tv/video input switch, set it to video.