1 make sure your dv device is properly connected, turned on, and that you??ve selected matrox dv-1394 device control in adobe premiere's preferences dialog box as explained in "setting up dv-1394 device control" on page 58.
if you're using a camcorder, switch it to vtr mode.
2 load a tape that you've striped with time code into your device.
3 open the project you want to export to tape.
4 choose file ] export timeline ] export to tape. this displays the following dialog box:
5 indicate which channels you want to export by selecting export video and/or export audio. if you decide to export audio only, black video will accompany your audio.
6 by default, the edit points are displayed in time code format. if you would like to display the edit points in frames, select show time code in frames.
tip to toggle between the two formats, press ctrl+shift while the insertion point (flashing vertical bar) is in a time code field.7 to mark the in point where you want to start recording on your tape, play your tape using the transport controls provided in the dialog box, then click the mark in button when you see the frame you want. you can also type the in point you want in the mark in field.
8 under export setup, specify how you want the export to be done, such as whether you want to record color bars at the start of your tape, and record your entire project or just the work area.
you can enter values in the duration fields only. the in point fields are automatically adjusted for you based on the values you enter in the duration fields. items are recorded on your tape in the order they are listed in the dialog box.
- color bars to add color bars at the start of your recording, enter a duration for the amount of time you want the color bars to be recorded.
color bars are accompanied by a 1-khz audio tone.
- logo to add a logo to your recording, click the browse button to locate the logo you would like to add, then enter the duration for the logo. the logo must be a full-screen, 32-bit, uncompressed .tga file.
- leading black to add black video to the start of your project, enter a corresponding duration.
9 from the project list, select entire project to export your entire project, or work area to export the range marked by the work area bar.
10 to add black video to the end of your project, enter a value in the duration field for trailing black.
11 click export to start the export to tape.
non-realtime segments will be rendered by adobe premiere before the export.