to install the fs726 or fs750 switch in a rack, use the following procedure (and refer to figure 4-1).to perform this procedure, you need the 19-inch rack-mount kit supplied with your switch.

    1. attach the supplied mounting brackets to the side of the switch.

    2. insert the screws provided in the rack-mount kit through each bracket and into the bracket mounting holes in the switch.

    3. tighten the screws with a #1 phillips screwdriver to secure each bracket.

    4. align the mounting holes in the brackets with the holes in the rack, and insert two pan-head screws with nylon washers through each bracket and into the rack.

    5. tighten the screws with a #2 phillips screwdriver to secure the switch in the rack.

    6. proceed to "connecting devices to the switch."