when attaching devices to an fs726 or an fs750, the switch’s support for auto uplink technology allows you to attach devices using either straight-through or crossover cables (for more information about auto link' technology, refer to "auto uplink " on page 12).
7. connect each device to an rj-45 network port on the switch’s front panel (see figure 4-2). use category 5 (cat5) unshielded twisted-pair (utp) cable terminated with an rj-45 connector to make these connections.
front panel of the model fs726 or model fs750 switch
(model fs726 shown)
figure 4-2. connecting devices to the switch
ethernet specifications limit the cable length between the switch and the attached device to 100 m (328 ft).