if you are upgrading from another palm os handheld, follow the instructions in appendix c, "upgrade information" before completing these steps.
to connect the hotsync cradle/cable:
1. turn off your computer.
2. plug the hotsync cradle/cable into a serial (com) port on your computer.
your hotsync cradle/cable requires a dedicated port. it cannot share a port with an internal modem or other device. if you are unsure of the exact location of the serial port, refer to the manual supplied with your computer.
if your computer does not have a dedicated serial port available, or the cradle/cable does not fit your computer, you can order the following hotsync cradle/cable adapters from:
http://www.palm.com/support/m100/extras
