LIST OF COMMANDS
(1) commands related to setting
label size set command [esc] d .................24
(2) commands related to fine adjustment
position fine adjust command [esc] ax ................28
print density fine adjust command [esc] ay.................34
ribbon motor drive voltage fine adjust command [esc] rm.................35
(3) commands related to clear
image buffer clear command [esc] c .................36
clear area command [esc] xr.................37
(4) commands related to drawing format setting
line format command [esc] lc ................39
bit map font format command [esc] pc.................43
outline font format command [esc] pv ................56
bar code format command [esc] xb.................67
(5) commands related to print data
bit map font data command [esc] rc.................100
outline font data command [esc] rv.................103
bar code data command [esc] rb.................106
(6) commands related to issue and feed
issue command [esc] xs ................120
feed command [esc] t..................133
eject command [esc] ib ................139
forward/reverse feed command [esc] u .................140
(7) commands related to writable characters
format command [esc] j1 ................142
bit map writable character command [esc] xd.................143
(8) commands related to graphics
graphic command [esc] sg.................147
(9) commands related to pc command saving
format command [esc] j1 ................142
save start command [esc] xo.................154
save terminate command [esc] xp ................155
saved data call command [esc] xq.................156
(10) commands related to check
head broken dots check command [esc] hd.................157
(11) commands related to display
message display command [esc] xj.................158
(12) commands related to control
reset command [esc] wr.................160
(13) commands related to status
status request command [esc] ws.................161