(2) code39 (standard)
(3) code39 (full ascii)
(4) nw-7
(5) code93
(6) code128
[transfer code]
① how to transmit control code data:
nul (00h) → ]@ (3eh, 40h)
soh (01h) → ]a (3eh, 41h)
stx (02h) → ]b (3eh, 42h)
to
gs (1dh) → ]] (3eh, 5dh)
rs (1eh) → ] ^ (3eh, 5eh)
us (1fh) → ]_ (3eh, 5fh)
② how to transmit special codes:
value
30 (character ]) → ]0
95 → ]1
96 → ]2
97 → ]3
98 → ]4
99 → ]5
100 → ]6
101 → ]7
102 → ]8
③ designation of start code:
start (code a) → ]7
start (code b) → ]6
start (code c) → ]5
value code table
(7) data matrix
the code to be used is designated using the format id.
[transfer code]
① how to send control code data
nul (00h) → ]@ (3eh, 40h)
soh (01h) → ]a (3eh, 41h)
stx (02h) → ]b (3eh, 42h)
to
gs (1dh) → ]] (3eh, 5dh)
rs (1eh) → ]^ (3eh, 5eh)
us (1fh) → ]_ (3eh, 5fh)
② how to send a special code
] (3eh) → ]0 (3eh, 30h)
③ how to send a kanji code
shift jis
jis hexadecimal
(for details, refer to the section for the bar code data command.)
(8) pdf417
the following modes are automatically selected according to the code used.
[transfer code]
① how to send control code data
nul (00h) → ]@ (3eh, 40h)
soh (01h) → ]a (3eh, 41h)
stx (02h) → ]b (3eh, 42h)
to
gs (1dh) → ]] (3eh, 5dh)
rs (1eh) → ]^ (3eh, 5eh)
us (1fh) → ]_ (3eh, 5fh)
② how to send a special code
] (3eh) → ]0 (3eh, 30h)
③ how to send a kanji code
shift jis
jis hexadecimal
(for details, refer to the section for the bar code data command.)
(9) micropdf417
the following modes are automatically selected according to the code used.
[transfer code]
① how to send control code data
nul (00h) → ]@ (3eh, 40h)
soh (01h) → ]a (3eh, 41h)
stx (02h) → ]b (3eh, 42h)
to
gs (1dh) → ]] (3eh, 5dh)
rs (1eh) → ]^ (3eh, 5eh)
us (1fh) → ]_ (3eh, 5fh)
② how to send a special code
] (3eh) → ]0 (3eh, 30h)
③ how to send a kanji code
shift jis
jis hexadecimal
(for details, refer to the section for the bar code data command.)
(10) postal code
* “(” or “)” can be designated only as a start/stop code.
these should not be entered in data.
if these are entered between data, no bar code is drawn.
(11) maxicode
① how to send control code data
soh (01h) → ]a (3eh, 41h)
stx (02h) → ]b (3eh, 42h)
to
gs (1dh) → ]] (3eh, 5dh)
rs (1eh) → ]^ (3eh, 5eh)
us (1fh) → ]_ (3eh, 5fh)
② how to send a special code
] (3eh) → ]0 (3eh, 30h)
③ how to send a kanji code
shift jis
jis hexadecimal
(for details, refer to the section for the bar code data command.)
1. nul data in the table cannot be used, however, it can be designated.
2. if it is designated, data following “nul” data is not printed.
(12) cp code
[transfer code]
① how to send control code data
nul (00h) → ]@ (3eh, 40h)
soh (01h) → ]a (3eh, 41h)
stx (02h) → ]b (3eh, 42h)
to
gs (1dh) → ]] (3eh, 5dh)
rs (1eh) → ]^ (3eh, 5eh)
us (1fh) → ]_ (3eh, 5fh)
② how to send a special code
] (3eh) → ]0 (3eh, 30h)
③ how to send a kanji code
shift jis
jis hexadecimal
(for details, refer to the section for the bar code data command.)