an example of the label issue operation is described below.

    (1) where the save data call command is not used:

   

    (1) when placing new paper, the label size set command and feed command must always be sent. when using the same paper after the power is turned off and then on, the label size set command and feed command may be omitted.

    (2) after the power is turned off and then on, the bit map font, outline font, and bar code format commands should be sent as occasion demands because they are not protected in memory.

    (2) where the save data call command is used:

   

    (1) when placing new paper, the feed command must always be sent. when using the same paper after the power is turned off and then on, the feed command may be omitted.

    (2) if the option for “automatic call at power on” for the save data call command has previously been selected, the save data call command may be omitted after the power is turned off and then on.