(1) commands related to setting

    label size set command [esc] d ...........................23

    (2) commands related to fine adjustment

    position fine adjust command [esc] ax ..........................26

    print density fine adjust command [esc] ay...........................32

    ribbon motor drive voltage fine adjust command [esc] rm...........................33

    (3) commands related to clear

    image buffer clear command [esc] c ...........................34

    clear area command [esc] xr...........................35

    (4) commands related to drawing format setting

    line format command [esc] lc ..........................37

    bit map font format command [esc] pc ..........................41

    outline font format command [esc] pv ..........................53

    bar code format command [esc] xb ..........................64

    (5) commands related to print data

    bit map font data command [esc] rc ..........................97

    outline font data command [esc] rv ..........................100

    bar code data command [esc] rb ..........................103

    (6) commands related to issue and feed

    issue command [esc] xs ..........................117

    feed command [esc] t ..........................129

    eject command [esc] ib ..........................134

    forward/reverse feed command [esc] u ..........................135

    (7) commands related to writable characters

    format command [esc] j1 ..........................137

    bit map writable character command [esc] xd ..........................138

    (8) commands related to graphics

    graphic command [esc] sg ..........................142

    (9) commands related to pc command saving

    format command [esc] j1 ..........................137

    save start command [esc] xo ..........................149

    save terminate command [esc] xp ..........................150

    saved data call command [esc] xq ..........................151

    (10) commands related to display

    message display command [esc] xj ..........................152

    (11) commands related to control

    reset command [esc] wr ..........................154

    (12) commands related to status

    status request command [esc] ws ..........................155