(7) data matrix

    the code to be used is designated using the format id.

   

    [transfer code]

   

    1 how to send control code data

    nul (00h) → ]@ (3eh, 40h)

    soh (01h) → ]a (3eh, 41h)

    stx (02h) → ]b (3eh, 42h)

    to

    gs (1dh) → ]] (3eh, 5dh)

    rs (1eh) → ]^ (3eh, 5eh)

    us (1fh) → ]_ (3eh, 5fh)

    2 how to send a special code

    ] (3eh) → ]0 (3eh, 30h)

    3 how to send a kanji code

    shift jis

    jis hexadecimal

    (for details, refer to the section for the bar code data command.)

    (8) pdf417

    the following modes are automatically selected according to the code used.

   

    (9) micropdf417

    the following modes are automatically selected according to the code used.

   

    (10) postal code

   

    (11) maxicode

   

    1 how to send control code data

    soh (01h) →]a (3eh, 41h)

    stx (02h) →]b (3eh, 42h)

    to

    gs (1dh) → ]] (3eh, 5dh)

    rs (1eh) → ]^ (3eh, 5eh)

    us (1fh) → ]_ (3eh, 5fh)

    2 how to send a special code

    ] (3eh) → ]0 (3eh, 30h)

    3 how to send a kanji code

    shift jis

    jis hexadecimal

    (for details, refer to the section for the bar code data command.)

    1. nul data in the table cannot be used, however, it can be designated.

    2. if it is designated, data following “nul” data is not printed.

    (12) cp code

    [transfer code]

   

    1 how to send control code data

    nul (00h) →]@ (3eh, 40h)

    soh (01h) →]a (3eh, 41h)

    stx (02h) →]b (3eh, 42h)

    to

    gs (1dh) →]] (3eh, 5dh)

    rs (1eh) →]^ (3eh, 5eh)

    us (1fh) →]_ (3eh, 5fh)

    2 how to send a special code

    ] (3eh) →]0 (3eh, 30h)

    3 how to send a kanji code

    shift jis

    jis hexadecimal

    (for details, refer to the section for the bar code data command.)