designed for high performance and versatility, the dfe-550tx adapter provides the following features:

    ·plug and play installation.

    ·complies with the ieee 802.3 10base-t and 802.3u 100base-tx ethernet standards.

    ·rj-45 connector for standard network cable connection.

    ·100mbps fast ethernet or 10mbps ethernet data transfer rates, automatically configured by nway auto-negotiation.

    ·full duplex or half-duplex operation, also nway configured.

    ·pci bus master direct memory access for high throughput and low cpu utilization.

    ·acpi 1.0 power management compliant.

    ·wake-on-lan power-saving feature allows sleeping pcs to be woken up and used via remote stations.

    ·ieee 802.3x flow control enabled with full duplex operation, allowing enhanced operation when directly connected to a switch.

    ·ieee 802.1q/vlan tagging supported

    ·vlan registration using ieee802.1q gvrp standard

    ·ieee 802.1p tagging supported

    ·ip multicast packet filtering reduces cpu utilization and conserves network bandwidth.

    ·sixteen packet counters provide a full range of network management statistics.

    ·dl10050a d-link's own 32-bit intelligent ethernet controller.

    ·large 2kb tx, 2kb rx fifo buffers synchronize transmissions and buffer data to help prevent packet loss.

    ·three led indicators: link/act, speed (10/100), full/half duplex.

    ·drivers for all leading network operating systems.