instant broadband. series

    the lan indicators

    power green. the power led illuminates when the router is powered

    on.

    link/act green. the link/act led serves two purposes. if the led

    is continuously illuminated, the router is successfully connected

    to a device through the corresponding port (1-4). if

    the led is flickering, the router is actively sending or

    receiving data over that port.

    full/col green. the full/col led also serves two purposes. if this

    led is continuously illuminated, the connection made

    through the corresponding port is successfully running in

    full duplex mode. if the led is flickering, the connection is

    experiencing collisions. infrequent collisions are normal. if

    this led is flickering too often, there may be a problem with

    your connection. check the troubleshooting section if you

    think there is a problem.

    100 orange. the 100 led illuminates when a successful

    100mbps connection is made through the corresponding

    port.

    the wan indicators

    link green. the link led illuminates when a successful connection

    is made between the router and your broadband device

    or network.

    act green. the act led flickers when the router is sending or

    receiving data over the broadband port.

    diag red. the diag led illuminates when the router goes

    through its self-diagnosis mode during boot-up. it will turn

    off upon successful completion of the diagnostic. if this led

    stays on for an abnormally long period of time, refer to

    "appendix a: troubleshooting."